Replacing The Refrigerant High Pressure Sensor - 2; Replacing The Refrigerant High Pressure Sensor - 3 - Daikin EGSQH10S18AA9W Service Manual

ESIE13-03 | Part 3. Repair
4 4
1
1 3 2
1. Screw
2. Bracket
3. Sound insulation
5. From the front side, release the 3 velcro strips
1 1
1. Velcro strip
2. Compressor insulation
6. From the rear side, remove the compressor insulation.
7. Use a welding blanket (1) to protect the components that surround the refrigerant high pressure sensor (2).
8. Place 2 wet cooling clamps (3) on the refrigerant high pressure sensor (2) body.
9. Braze the refrigerant high pressure sensor piping.
13/05/15 | Version 2.0
Ground source heat pump
Figure 58 - Replacing the refrigerant high pressure sensor - 2
4
1
1
on the compressor insulation
(1)
Figure 59 - Replacing the refrigerant high pressure sensor - 3
1 2
2. Unit specific repair procedures
4 5
3
4. Velcro strip
5. Velcro strip (compressor)
and open the compressor insulation
(2)
3
3. Compressor
3
.
(2)
Page 139