Information
To check the basic information of Signage Monitor
(
)
You can see the basic information on Signage Monitor.
Smart Energy Saving
You can also switch to
Saving Mode is set to Off.)
PICTURE ID Settings
If you assign the
PICTURE ID
controlled remotely.
1
Press the red
ON
button on the remote control to assign the
2
Set ID
Assign the
to the selection of your choice.
Set ID
•
A set with a different
NOTE
•
If
PICTURE ID
is set to 2, only the upper right monitor, which has a
•
If you press the green
OFF
any button on the remote control, all monitors can be controlled by IR signals regardless of
Mode. (You can switch to
using the remote control, only displays with matching
PICTURE ID
from the
cannot be controlled by IR signals.
button for
PICTURE
ID, the
Smart Energy Saving
PICTURE
ID.
Set ID
of 2, can be controlled by IR signals.
PICTURE
IDs for all monitors are turned off. If you then press
Mode only when Energy
PICTURE ID
and
Set ID
can be
Set
ID.
19