Option
Date/Time
System configuration
Table 21. System Configuration
Option
Integrated NIC
SATA Operation
Drives
SMART Reporting
USB Configuration
Description
Click one of the following options:
•
Always, Except Internal HDD—Default
•
Always
•
Never
Allows you to set the date and time. The change to the system date
and time takes effect immediately.
Description
Allows you to configure the integrated network controller.
Click one of the following options:
•
Disabled
•
Enabled
•
Enabled w/PXE—Default
Allows you to configure the operating mode of the integrated SATA
hard-drive controller.
Click one of the following options:
•
Disabled
•
AHCI
•
RAID On—Default
NOTE:
SATA is configured to support RAID
mode.
Allows you to enable or disable various drives on board.
The options are:
•
SATA-0
•
SATA–1
•
M.2 PCIe SSD-0
All the options are set by default.
This field controls whether hard drive errors for integrated drives
are reported during system startup. This technology is part of the
SMART (Self Monitoring Analysis and Reporting Technology)
specification. This option is disabled by default.
•
Enable SMART Reporting
Allows you to enable or disable the internal/integrated USB
configuration.
The options are:
•
Enable USB Boot Support
System setup
79