Troubleshooting - Samsung BA-507S Owner's Manual

Troubleshooting

Error/Symbol What Does It Mean?
Monitor may have been
inflated without the cuff
around the arm OR
Cuff may not be postioned
correctly on the arm.
You may have moved
while the cuff was inflat-
ing, it is now attempting
to reinflate. Check the
cuff to make sure it's
positioned correctly.
You may have moved
or spoken during the
measurement process.
You may have been
startled by a noise or
vibration while measur-
ing.
22
Troubleshooting
How To Fix It
Read page 17 (Applying
the Cuff).
Read pages 15 & 16
(Important Reminders).
Remember that it is
important not to move
and speak as it may ele-
vate measurements.
Make sure you are in a
quiet and comfortable
place when taking a
measurement.
Troubleshooting
Error/Symbol What Does It Mean?
You have been ignoring
the flashing replace
battery symbol (
The batteries have run
down.
Blood pressure Cuff may not be aligned
value seems too correctly.
high or too low
The monitor keeps Circuitry locked.
reinflating
Unable to take a The cuff may not be
measurement positioned correctly.
after receiving an
error symbol.
How To Fix It
Replace with four new
"AA" batteries. Make
). sure the polarities are
positioned correctly in the
battery compartment
before continuing to mea-
sure your blood pressure.
Replace with 4 AA bat-
teries quickly so you may
continue to measure your
blood pressure without
any interruptions.
Read page 17
(Applying the Cuff).
Remove then reinsert
the batteries and then
proceed to take
measurement again.
Read page 17
(Applying the Cuff).
23
Troubleshooting