Advertisement
8
en | System overview
3
System overview
The VG4-SFPSCKT is a media converter module that provides an integrated fiber optic
solution. The module is designed to accept any of the 10/100 Mbps Small Form-factor
Pluggable (SFP) modules listed below, for use with Multimode optical fiber (MMF) or Single
mode (SMF) optical fiber with LC or SC connectors.
The media converter module, along with the SFP module, is user-installed into:
–
–
–
The Fiber Optic module accepts the following SFP modules:
Sub-module
SFP-2
SFP-3
SFP-25
SFP-26
Notice!
The SFP module is not included with the VG4-SFPSCKT kit; it must be purchased separately.
The SFP-25/SFP-26 modules are counterparts; if you use one in the VG4-SFPSCKT module
then you must use the other in the CNFE2MC head-end unit. For example, SFP-25 is used in
the VG4-SFPSCKT module installed into a VG4 power supply. You must use the SFP-26 module
in the CNFE2MC head-end unit.
The following chart lists the compatibility between the SFP modules:
SFP Sub-module used in
VG4-SFPSCKT
SFP-2
SFP-3
SFP-25
SFP-26
2016.07 | 2.0 | F.01U.134.924
Any of the following AUTODOME power supply units:
–
VG4-A-PA1
–
VG4-A-PA2
–
VG4-A-PSU1
–
VG4-A-PSU2
Any of the following MIC IP power supply units (for use with a MIC550, a MIC550IR, or a
MIC612 analog camera):
–
MIC-IP-PS-115
–
MIC-IP-PS-24
–
MIC-IPIR-PS-115
–
MIC-IPIR-PS-230
–
MIC-IPIR-PS-24
An EXTEGRA IP 9000 FX camera
Fiber Type
MMF
SMF
MMF
MMF
Use this SFP Sub-module
in CNFE2MC
SFP-2
SFP-3
SFP-26
SFP-25
Optical Interface
Duplex LC
Duplex LC
Single SC
Single SC
Installation Manual
Fiber Optic Ethernet Media Converter Kit
Bosch Security Systems
Advertisement
