Engine Setting Function (Engine Power Control) - Ducati DIAVEL Owner's Manual

ENGINE setting function (Engine Power
Control)
This function allows customising ENGINE power and
delivery.
To gain access to this function display the "setting"
menu page 73, use buttons (1) or (2) to select the
"RIDING MODE" function and press the reset button
(4) to shift to next page.
Select the riding mode you wish to change using
button (1) or (2) and press the reset button (4) to shift
to next page; now use buttons (1) or (2) to select the
"ENGINE" indication and press the reset button (4)
again to confirm selection.
Once function is accessed, engine setting (ENGINE
162 HIGH, 162 LOW or 100 HP) will be displayed on
the right side inside a rectangle.
Note
In France and Japan versions, display will show
settings (ENGINE HIGH, MIDDLE or LOW).
Use buttons (1) or (2) to select one of the three engine
settings; once the new setting has been selected,
press the reset button (4) to highlight "MEMORY".
Now store the new setting by keeping the reset
button (4) pressed for 3 seconds with "MEMORY"
highlighted.
If setting has been stored successfully,
"MEMORIZED" will appear in green for 2 seconds,
and "EXIT" will be automatically highlighted.
To quit the setting function, press the reset button (4)
with "EXIT" highlighted.
83