Unpacking And Removing Shipping Material - LG WT1901C series Owner's Manual

UNPACKING AND REMOVING
SHIPPING MATERIAL
1. After removing the carton and shipping material,
lift the washer off the foam base. Make sure the
plastic tub support comes off with the base and
is not stuck to the bottom of the washer.
If you must lay the washer down to remove the base
packaging materials, always protect the side of the
washer and lay it carefully on its side. DO NOT lay
the washer on its front or back.
Plastic Tub Support
2. Save the foam block (that contains the Owner's
Manual, parts and laundry product samples) for
future use. If the washer must be moved in the
future, the foam block will help prevent damage
to the washer during transportation.
NOTE: To prevent damage, do not remove the
foam block until the washer is at the final loca-
tion.
3. Carefully remove the two foam pads which
cover the top sides of the tub guide, making
sure not to leave behind any pieces of the foam.
4. Unfasten the power cord from the back of the
washer.
TOOLS YOU WILL NEED
Carton Base
y Adjustable Pliers
y Carpenter's Level
INSTALLATION INSTRUCTIONS
Pad
9