Related Manuals for Furuno MCU002
Summary of Contents for Furuno MCU002
- Page 1 Model: MCU002 Remote Control Unit...
- Page 2 Screen Mode) v3.12 3-6. User Interface Auto-Hide “10 Seconds” Recommended 3-7. Limitations and Notes 4. Installing Model MCU002 4-1. Dimensions 4-2. Flush Mounting 4-3. Interconnection 5. Model MCU002 with TZT9/14/BB v3.02 or Earlier 6. Tips – Model TZT9/14/BB with Generic HID Mouse...
-
Page 3: Technical Specifications
1. Model: MCU002 MCU002 The Model is a compact remote control unit with TZT9/14/BB. offers expandability of multi touch operation of the TZT9/14/BB to the hardware key operation, as the best supplemental tool to multi touch operation. This document describes the basic information on specifications, operations, and installation of the MCU002. - Page 4 3. Operations – User Interface 3-1. Getting Started – Model TZT9/14/BB New Version v3.12 To fully make use of the MCU002, update the TZT9/14/BB to v3.12, which will be released in May 2014. 3-2. Keys and Functions – Basic Operations The MCU002 consists of 10 hardware keys to control the TZT9/14/BB as described below.
- Page 5 When the NAVpilot-700 mode is changed between AUTO/NAV and STBY with the MCU002 or touch operations, the TZT9/14/BB will generate a beep sound with the following notification on the top of the screen. STBY to AUTO/NAV AUTO/NAV to STBY The notification of [NAVpilot is engaged.] will appear.
- Page 6 Note: NO “drag” function. For details on limitations The joystick has of operations with the MCU002, see Section 3-5. (5) － / UP (▲) (6) ＋ / DOWN (▼) (7) ENT These three (3) components work as the RotoKey™: [-/▲ (UP)] key as rotating the RotoKey™...
- Page 7 Press [-/▲] or [+/▼] to zoom in or zoom out the Plotter and Radar screen. (8) CANCEL & MOB This key has two (2) functions: Short press to activate the “CANCEL” and long press the “MOB” functions as shown below. Short Press for “CANCEL”...
- Page 8 The TZT9/14/BB v3.12 program has new setting options of Cross Cursor Cross Cursor Speed, which enables to show a cross cursor on the screen and adjust its speed. With the MCU002, the cross cursor will help to see a present cursor location. Menu Settings Cross Cursor on Screen While the joystick in operation, the gray, thick cross cursor [Menu] –...
- Page 9 Cross Cursors on Other Screens Tips – No cross cursor while touch operations When the TZT9/14/BB is operated by touch, the cross cursor will not appear. The cross cursor will appear only when the cursor is in operation with the MCU002 joystick.
- Page 10 3-5. Entering a Point – New with Model TZTBB and TZT14 (External Touch Screen Mode) v3.12 Pushing the MCU002 joystick, [New Point] will be highlighted at default on the contextual menus. You can just press [ENT] to enter the point.
- Page 11 [User Interface Auto-Hide]. This setting offers the time period before the popped-up RotoKey™ or contextual menus and window closes. With the MCU002 in use, the setting of “10 seconds” is useful to show the popped up items for a longer time.
-
Page 12: Limitations And Notes
NO “drag” function. The guard zone setting of Radar, which requires to be adjusted by drag, will not be available with the MCU002 joystick. This operation should be made by touch operations or with a generic mouse/trackball unit. (2) Limitation in 3D Mode – Pan/Tilt You can turn the screen mode into the 3D mode by selecting [3D Mode] from the contextual menu. - Page 13 (7) Note on Power On/Off It is not possible to turn on the TZT9/14/BB with the MCU002. Ensure to press the Power key of the TZT9/14/BB. However, the power can be turned off with the operation of [HOME &...
- Page 14 4. Installing Model MCU002 4-1. Dimensions...
-
Page 15: Flush Mounting
MCU002 can be connected to one (1) USB port via a USB hub as shown at right. (2) When there are two (2) sets of MCU002 are connected to one (1) TZT9/14/BB, we recommend that both MCU002 units should not be operated simultaneously because it can give a... - Page 16 5. Model MCU002 with TZT9/14/BB v3.02 or Earlier If the MCU002 is used with the TZT9/14/BB v3.02 or earlier program, there will be limitations as described below. No gray, thick cross cursor is available because there is no menu option of Cross Cursor.
- Page 17 History Release Date Page Section Descriptions release Apr. 16, 2014 Rev. 1 May xx, 2014 Descriptions of the Auto Scroll mode are added. Rev. 1 May xx, 2014 Section numbers changed after adding Rev. 1 May xx, 2014 descriptions of the Auto Scroll mode in Section 3-4. Rev.