General Information; General Safety; Service Rules - Honda Nighthawk CB750SC 1984 Shop Manual

@
HONDA
cB7sosc
1. GENERAL INFORMATION
GENERAL SAFETY
SERVICE RULES
MODEL IDENTIFICATION
SPEC1 FlCATlONS
TORQUE VALUES
GENERAL SAFETY
1-1 TOOLS
1 -7
1-1 CABLE 81 HARNESS ROUTING 1 -9
1-2 EMISSION CONTROL SYSTEMS 1-13
1-3 EIVIISSION CONTROL I N F O R M A T I O N
1-5
LABELS 1-14
rzmEl
If the engine must be running to do some work, make
m! m m
The battery electrolyte contains sulfuric acid. Protect
sure the area is well-ventilated. Never run the engine
your eyes, skin and clothing. In case of contact,
in a closed area The exhaust contains poisonous
flush thoroughly with wter and call a doctor i f
carbon monoxide gas
electrolyte gea in your eyes.
0
mmm
Gasoline is extremely flammable and is explosive
Emam
The battery genemtes hydrogen gas which can be
under certain conditions Do not smoke or aUow
highly explosive. Do not smoke or allow flames or
mmes or spark in your working area.
spark near the battery, especially while chargritg it.
'
SERY ICE RULES
1.
Use genuine HONDA or HONDA-recommended parts and lubricants or their equivalents. Parts that do not meet HONDA's
design specifications may damage the motorcycle.
2.
Use the special tools designed for this product.
3.
Use only metric tools when servicing this motorcycle. Metric bolts, nuts, and screws are not interchangeable with English
fasteners. The use of incorrect tools and fasteners may damage the motorcycle.
4. Install new gaskets, O-rings, cotter pins, lock plates, etc. when reassembling.
5.
When tightening bolts or nuts, begin with the larger-diameter or inner bolts first, and tighten t o the specified torque dia-
gonally, unless a partic~lar sequence i s specified.
6.
Clean parts in cleaning solvent upon disassembly. Lubricate any sliding surfaces before reassembly.
7. After reassembly, check all parts for proper installation and operation.
Date of Issue: December, 1983
O
HONDA MOTOR CO., LTD.
1 - 1
- A