Brookstone 306612 Manual

Fold Fold
LITHIUM-ION BATTERY • Reorient or relocate the receiving
antenna.
WARNINGS
• Increase the distance between the
This device contains a non-removable
equipment and receiver.
lithium-ion battery. The battery must be
• Connect the equipment to an outlet
recycled or disposed of properly.
on a circuit different from that to
Contact your local waste management
which the receiver is connected.
office for information on battery
• Consult the dealer or an experienced
recycling or disposal.
radio/TV technician for help.
FCC INFORMATION
This equipment complies with Part 15
of the FCC Rules. Operation is subject
This equipment has been tested
to the following two conditions:
and found to comply with the
1. This equipment may not cause
limits for a Class B Digital Device,
harmful interference.
pursuant to Part 15 of the FCC
2. This equipment must accept any
Rules. These limits are designed to
interference received, including
provide reasonable protection against
interference that may cause
harmful interference in a residential
undesired operation.
installation. This equipment generates,
uses, and can radiate radio frequency
Modifications not authorized by the
energy and, if not installed and used manufacturer may void the user' s
in accordance with the instructions, authority to operate this device.
may cause harmful interference to
FCCID: 2AF8E-WL-2706
radio communications. However, there
is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and
on, the user is encouraged to try to
correct the interference by one or
more of the following measures:
Fold Fold
LOCATION OF PARTS AND PAIRING YOUR DEVICE
CONTROLS
1. Press and hold the Power Button for
3 seconds to power on the
1. Power Button
headphones. The blue light will
2. Volume Up/Track Backward Button
illuminate.
3. Volume Down/Track Forward Button
2. If the Button is pressed and held, the
4. Microphone
headphones will search for
5. Audio Cable Port Bluetooth
and blue lights will flash alternatively.
6. Micro USB Charging Port
3. Once the headphones are in pairing
7. Micro USB Charging Cable
mode and your device is ready to
(not shown)
pair, select 'Brookstone Headphones.'
8. Audio Cable (not shown)
If prompted, use 0000 as a PIN for
9. Travel Pouch (not shown)
the pairing code. Once the
headphones are selected, a beep
tone will sound and the blue light
will flash.
NOTE:
If the headphones were powered on
and without Bluetooth
3 minutes, they will auto shut off. After
a successful connection, the blue LED
1
will flash three times every 5 seconds
2
3 (Bluetooth
music)
6
5
4
enabled devices. The red
®
connection for
®
connected but not playing
®
306612
Merrimack, New Hampshire, USA 03054
800-846-3000 • Brookstone.com