Table of Contents
Advertisement
SECTION 1: UPPER FRAMES
•
I
n your kit, parts are bagged according to each major assembly and are labeled "Bag
1, Bag 2, etc." You will note that the heading for each assembly indicates which bag
correlates with each assembly.
•
For a good installation, only open up the bag that you need for particular assembly.
•
Please check the parts in that bag against the parts list shown for each assembly as
well as each subassembly to make sure there are no missing parts.
•
Small parts such as nuts and bolts can be put into containers or trays to prevent
losing parts.
•
No. with ***** means that part is not included in the kit.
•
Colors of the parts in the drawings may look differently from ones in the kit.
1-1 ELEVATOR SHAFT BEARINGS
No.
1
2
Note: The holes on the frames are designed for "push-fit" feature. Sometime you may
have to sand them a little bit before pushing the bearings in. The bearing flange mates
Bag#
Description
Frame
Upper Frame (from Frame Bag)
1
5X10X4Flanged Bearing
against the inside of the frame.
Page 14 of 79
Bag 1
Qty
2
2
Advertisement
Table of Contents
