Table of Contents
Advertisement
PROPER ASSEMBLY
1. Set base on a level, dry surface.
2. The Thinsulate™ Insulation will help
to shield the warming element from
your counter, table or buffet top.
3. Turn unit top upside-down
4. Slide back panel out to its full
extended position.
5. Lift side panels.
6. Match tab on first side panel to clip
on back panel and firmly press
together until secured. Match tab on
second side panel to clip on back
panel and firmly press together until
secured.
7. Turn top of unit right-side up and
place into grooves on base side and
back. Press firmly together until
secured.
8. Secure safety clips on both sides.
9. Slide front door out and swing down
90°.
10. Test secure fit of top and bottom
unit by gently lifting up the unit by
placing both hands on side panels.
If the top of the unit is not secured to
the bottom, check safety clips, re-
align to grooves in the base unit and
press firmly.
11. Plug electrical cord into back of
base unit and into properly
grounded wall socket.
6
Advertisement
Table of Contents
