4
3
1 PXI-1031/PXI-1031DC Chassis
2 Injector/Ejector Rail
PXI System Configuration with MAX
© National Instruments Corporation
1
5
3 Injector/Ejector Handle
4 PXI Module
Figure 2-5. Installing PXI or CompactPCI Modules
Configuration of the PXI system is handled through Measurement &
Automation Explorer (MAX), included on the NI Driver CD-ROM
packaged with your kit. MAX creates the
layout and parameters of your PXI system. After installing the software on
the NI Driver CD-ROM, the MAX icon will be present on the desktop. The
configuration steps for single or multiple chassis systems are the same.
Chapter 2
2
pxisys.ini
2-9
Installation and Configuration
5 NI PXI Controller
file that defines the
NI PXI-1031/PXI-1031DC User Manual