Connectors; Front Panel Connectors; Bias In; Detector - Pyramid CR10 User Manual

PSI System Controls and Diagnostics

13 Connectors

13.1 Front panel connectors

Test

Detector

Bias In

Figure 14. Front panel connectors
13.1.1 Bias in
SHV jack coaxial connector for high voltage input. Optional substitution of BNC connector for
systems with low bias voltages (less than 500 V).
13.1.2 Detector
SHV jack coaxial connector for detector signal input. Optional substitution of BNC connector
for systems with low bias voltages (less than 500 V).
13.1.3 Test
Lemo 00 coaxial connector for test voltage input. Typical mating free connector Lemo
FFA.00.250.

13.2 Rear panel connectors

Output Power +/- 12 VDC
Figure 15. Rear panel connectors
CR10 User Manual CR10_UM_180115 Page 27 of 40