Using The Flash - Konica Minolta Q-mini K-QM-3501E Operating Instructions Manual

Using the Flash

1
You can use the flash in dark places.
Be careful not to cover the flash emitter with the
fingers when taking images. If the flash is even
slightly covered, the light for that direction will not
reach the subject.
1 Press the Flash Button.
2
2 Press the Shutter Button.
• The light from the flash has a range of roughly
70 cm to 3 m.
• Be careful not to cover the light sensor with the
finger. The sensor will not be able to detect the
brightness.
• Under auto flash, the flash goes off depending
on the brightness. The
to indicate that the flash will go off.
• If charging of the flash is not yet completed, the
" " indicator will flash (
reduction flash). Wait until the indicator lights up.
You cannot record images until it lights up.
• The flash setting returns to Auto once the
power is turned off.
mark lights up in red
appears for red-eye