Disposal Of Packaging Materials; Power Supply: Receiver; Inserting/Replacing The Batteries - Silvercrest SFKS 2 A1 Operating Instructions Manual

Disposal of packaging materials

The packaging protects the appliance from damage
during transport. The packaging materials have been
selected for their environmental friendliness and ease
of disposal, and are therefore recyclable.
Returning the packaging into the material
cycle conserves raw materials and reduces
the amount of waste generated.
Dispose of packaging materials that are no longer
needed in accordance with applicable local regulations.

Power supply: receiver

The receiver is plugged into a properly installed mains
power outlet and does not require batteries.

Inserting/replacing the batteries

♦ Insert the unlocking tool
of the transmitter and turn it to the side to remove the
mounting plate
♦ Insert a 3 V battery, type CR 2032, into the battery
compartment
a "+" must be facing upwards.
SFKS 2 A1
into the recess on the side
(see Fig. 1).
. The side of the battery marked with
GB
IE
11