Universal Remote Control TRF-ZW2 Owner's Manual page 20

Inclusion/Exclusion for Devices with URC Custom Device Wizard
Step 1
Select Devices and click on the
Add Device option.
After adding a new device, the TRF-ZW2 Controller will ask you to name it and choose the room it is (or will be) located in.
Note:
If the device was previously included with a different Z-Wave system, you'll need to it exclude it before adding with your TRF-ZW2.
(You may also need to do this if you have problems Inclusion/Exclusion the first time.) Press the Retry button to start the exclusion process.
Once the device is excluded, add it by following the inclusion steps.
Step 2
Click on the "+" sign for the device's
category. A list of URC Custom Device
Wizards is displayed. Select a device
to include.
Step 3
Follow the steps in the Device Wizard
to add the device.