Panasonic FZ-G1 series Operating Instructions Manual page 19

5 Setup Windows
Follow the on-screen instructions.
 The computer restarts several times.
 After the computer is turned on, the screen remains black or
unchanged for a while, but this is not a malfunction. Wait for a
moment until the Windows setup screen appears.
 Setup of Windows will take approximately 5 minutes.
Go to the next step, confi rming each message on the display.
 You can set the Wireless Network after the setup of Windows is complete.
 If "Let's connect you to a network" is displayed, select [Skip for
now].
 "Join a wireless network" screen may not appear.
CAUTION
 You can change the user name, image and security setting after
setup of Windows.
 Use standard characters as a computer name: numbers 0
through 9, uppercase and lowercase letters from A to Z, and the
hyphen (-) character. Do not use the following words and charac-
ters for user name: CON, PRN, AUX, CLOCK$, NUL, COM1 to
COM9, LPT1 to LPT9, LPT, &, space.
If the error message "The computer name is not valid" appears,
check if characters other than the above are not entered. If the
error message still remains on the display, set the key entry
mode to English ("ENG") and enter characters.
6 Restart the computer
A Touch (Start).
B Touch (Power) - [Restart].
 A portion of the Panasonic PC Settings Utility functions will be enabled
after the computer restarts.
NOTE
 When the "Emergency notifi cation setting" screen appears, read
the on-screen messages carefully. Follow the on-screen instruc-
tions. You can set the "Emergency notifi cation setting" after the
setup of Windows is complete.
7 Update the on-screen manual
A Connect to the internet. Sign in to Windows as an administrator.
For further information, refer to
TIONS - Connect to a network.
B Update the on-screen manual.
Touch (Start) - [Panasonic PC Manual Selector].
Follow the on-screen instructions.
OPERATING INSTRUC-
19