Caution • Ensure you are using your Car DVR within your countries’ road laws. Please make sure you are familiar with your local road legislation before use. • Avoid leaving your Car DVR in direct sunlight for extended periods of time in an unventilated space. •...
Please read through these instructions before attempting to install this product. For the latest manual and product updates, please visit our website at www.nanocamplus.com.au or www.nanocamplus.co.nz 1.1 Features •...
Note: 1. Do not insert or remove a Micro SD card while your NCP-DVRWIFI is powered up or recording. This may damage your Micro SD card. 2. Please use Class 10 rated Micro SD cards up to 32GB.
Samsung Galaxy: S3 and later using Android 4.2.2 and above. For you to correctly connect your smart device to your NCP-DVRWIFI you will need to have the NCP-DVRWIFI App from the App store. You will also need to connect your smart phone to the NCP-DVRWIFI's WiFi signal using your smartphones WiFi settings.
To manually sync the time and date, please follow the instructions below. 1. Connect your smart device to the NCP-DVRWIFI using the instructions laid out in the WiFI Connection section of this manual.
To activate Park Mode please follow the directions below. 1. Connect your smart device to the NCP-DVRWIFI using the instructions laid out in the WiFI Connection section of this manual. 2. In the home page of the app press the Settings button.
To set your required resolution please follow the directions below. 1. Connect your smart device to the NCP-DVRWIFI using the instructions laid out in the WiFI Connection section of this manual. 2. In the home page of the app press the Settings button.
Formatting your Micro SD Card deletes all data on the Micro SD Card and prepares it for use with the NCP-DVRWIFI. It is recommended that you format your Micro SD Card before you use the NCP-DVRWIFI. It is also advised that the Micro SD Card is formatted once a month.
3.8 Deleting Videos To delete videos please follow the steps below. 1. Connect your smart device to the NCP-DVRWIFI using the instructions laid out in the WiFi Connection section of this manual. 2. In the opening page of the App press the (SD Card Files) button.