Table of Contents
Advertisement
COMPONENT SERVICABILITY
ADJUSTING ROLLERS
The leveling systems includes adjustable legs at front
corners which are turned clockwise to raise the refrigera-
tor and counterclockwise to lower it.
To adjust rollers:
1. The base grill shown in illustration is held in place by a
spring, tilt the base grille out exposing the adjustment
screws.
2. Using an adjustable wrench, turn the two front rollers
adjusting screws counterclockwise to raise the refrigera-
tor, and clockwise to lower it.
Refrigerator should have the front raised enough so that
the doors will close easily when opened half way.
OPERATING REQUIREMENTS
Install in an area that has temperature of a range of 60
0
to 105
F or the refrigerator will not run enough to main-
tain temperature.
Following clearances are required:
Side 1/2"
Top 1"
*Back 0"
*Metal cover on back gives adequate clearance when
touching wall. (1 1/4")
Refrigerator should be plugged into its own individual 15
amp/120V circuit.
PULL BASE GRILLE FROM THE TOP
(IT IS SPRING LOADED)
0
F
ADJUST ROLLERS
(COUNTERCLOCKWISE TO RAISE,
CLOCKWISE TO LOWER)
20
Hide quick links:
Advertisement
Table of Contents
