Salus SG888ZB Installation & User Manual

I B
N THE OX
Basic Gateway w/ Ethernet Cable
Port Cover
N :
OTE Additional equipment may be required due to building construction or materials, or other
radio interference that may reduce the radio range.
C , P , I
ONTROLS ORTS AND NDICATORS
Multi Button Light
Ring
Ethernet
Port
Port Cover
AC
Plug
Item Description
Multi Multi-function user input button:
Button Pair, Rejoin, and Factory defaults
Light Ring Tri-color ring of light to indicate status
AC Plug NEMA 1 (Type A) plug - Compatible with US
and Canadian standard 120 VAC, 15 A
electrical outlets
USB Port USB Type - A receptacle configured as a
dedicated charging port
Ethernet RJ-45 wired connection to the home Internet
router/gateway
Port
Power Port USB micro-A port for power input
Port Cover Protective cover for power and Ethernet ports
USB Power USB Power
Adapter Cable
I
NSTALLING THE
Power
Port
Customer's Internet
Gateway / Router
* The port cover under the gateway can be removed for
USB
easier access to the power and Ethernet ports.
Port
Recommended cabling sequence: first connect the
Ethernet cable to the gateway port, then attach the USB
power cable to the gateway power port. Refer to the
wyse.ly Pairing Guide for more information on how to
connect the gateway to wyse.ly.
U
SING THE
P D
AIRING EVICES TO THE
• To pair devices to the gateway, first ensure the gateway
is connected to the Internet (LED ring will be blue).
• Press the Multi Button until the LED ring flashes red (~3
seconds) and release to start the pairing process.
• Follow the instructions on wyse.ly or the wyse.ly app
to complete the device pairing process. Repeat the
process for each device.
• Press Multi Button again for more than 3 seconds to
exit pairing state. The LED ring will turn solid blue when
the pairing process is complete.
Installation / User Guide: Basic Gateway (SG888ZB )
S I
AFETY NSTRUCTIONS
Read these instructions before installing and using the Basic Gateway and keep
this guide in a safe place for future reference.
• Verify compatibility with your connected home system before installation.
• Follow all instructions provided by your connected home manufacturer
regarding the addition of devices to your connected home system. An
authorized, qualified installer may be required.
Installation /
User Guide
Salus accepts no responsibility for damage caused by not following these
instructions.
G
ATEWAY
*
D
EVICE
G
ATEWAY
R F D
ESET TO ACTORY EFAULTS
• To reset the device to factory default settings, press the
Multi Button until the LED ring is a solid red (~10
seconds). The LED ring will flash red, then go solid red.
• Release the Multi Button when the LED ring is solid red.
The device LED ring will turn solid green when it has
been returned to factory default settings.
LED I
NDICATIONS
Connected = connected to wyse.ly
Linked = connected to local router
Paired = connected to local ZigBee devices
Solid Blue On, Linked and Connected
Solid Green Powering Up or
On, Linked, NOT Connected
Solid Red On, NOT Linked, NOT Connected
Flashing Green Attempting to Connect or
In IDENTIFY Mode
Flashing Red Ready for Device Pairing
T
ROUBLESHOOTING
W
ILL NOT PAIR WITH DEVICES INITIALLY
• Radio interference is present at the desired location:
1) Relocate the gateway; 2) Select a different location for
the device; or 3) Add a ZigBee repeater to the system
D
EVICE LOSS OF CONNECTION AFTER PAIRING
• Radio environment may have changed: (1) Force rejoin
from device to possibly find a better radio path; or (2)
Apply radio interference solutions above
WH
BK