RULES FOR SAFE OPERATION (Continued)
STAY ALERT. Watch what you are doing and
DO NOT USE TOOL UNDER "BROWNOUT"
use common sense. Do not operate tool when
OR OTHER LOW VOLTAGE CONDITIONS.
you are tired. Do not rush.
Also, do not use with any device that could cause
the power supply voltage to change.
CHECK DAMAGED PARTS. Before further use
of the tool, a guard or other part that is damaged
WHEN USING THIS ROUTER WITH A ROUTER
should be carefully checked to determine that it
TABLE, HELP PREVENT POSSIBLE SERIOUS
will operate properly and perform its intended
function. Check for alignment of moving parts,
GUARDED AT ALL TIMES. Use only UL listed
binding of moving parts, breakage of parts,
router tables, with guards, that have been
mounting, and any other conditions that may
designed for use on routers that are of this type,
affect its operation. A guard or other part that is
size, and weight.
damaged should be properly repaired or replaced
SAVE THESE INSTRUCTIONS. Review them
by an authorized service center unless indicated
frequently and use them to instruct others who
elsewhere in this instruction manual.
may use this tool. If you loan someone this tool,
DO NOT USE TOOL IF SWITCH DOES NOT
loan them these instructions also.
TURN IT ON AND OFF. Have switches replaced
by an authorized service center.
INSPECT FOR and remove all nails from lumber
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains
DRUGS, ALCOHOL, MEDICATION. Do not
chemicals known to cause cancer, birth defects or
operate tool while under the influence of drugs,
other reproductive harm. Some examples of these
alcohol, or any medication.
WHEN SERVICING, USE ONLY IDENTICAL
• lead from lead-based paints,
RYOBI REPLACEMENT PARTS.
• crystalline silica from bricks and cement and other
POLARIZED PLUGS. To reduce the risk of
masonry products, and
electric shock, this tool has a polarized plug (one
• arsenic and chromium from chemically-treated
blade is wider than the other). This plug will fit in
a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
does not fit, contact a qualified electrician to
exposure to these chemicals: work in a well ventilated
install the proper outlet. Do not change the plug
area, and work with approved safety equipment, such
in any way.
as those dust masks that are specially designed to filter
out microscopic particles.
SAVE THESE INSTRUCTIONS