Pyle PBMSPG190 User Manual

WARNING:
1. DO NOT place objects on top ofthe device, as objects
may scratch the device.
2. DO NOT expose the device to dirty or dusty
environments.
3. DO NOT insert any foreign objects into the device
4. DO NOT expose the device to strong magnetic or
electrical eld
5. DO NOT use the device in the rain.
6. Please check with your Local Authority or retailer for
proper disposal of electronic products.
7. DO NOT disassemble the device. Only a certified
service technician should perform repair.
8. The device has apertures to disperse heat.
DO NOT block the device ventilation, the device may
become hot and malfunction as a result.
• Illegal operation may cause personal injury, which could be fatal.
• Illegal operation may cause damage to property.
FEATURES
This system includes one microphone and can be used with personal
computers, mobile phone, DVD, VCD, CD, LD, TV, MP3, radio, electronic
piano and any devices which have audio output. Ampli er circuit are using
high-performance, high- delity design, coupled with high-quality
professional speaker, in order to make the sound eld to get positioned so
clear, distinct levels e ect.
The sound system is outstanding, with deep and powerful bass and the
treble e ect is strong, with clear and bright pitch.
The professional electronic frequency division circuit enhances the
machine's crossover point e ect.
Using professional design and manufacture of high-capacity batteries, and
dedicated audio power capacitors, to make the speaker's power reserve
margin larger, more stable, better dynamics, higher signal to noise ratio.
PBMSPG190
Street Blaster Bluetooth Boom Box
Speaker System
Wireless & Portable Stereo Speaker
with Built-in LED Lights (300 Watt)
Troubleshooting
Fault Possible Cause
1. No input sound source
No sound
2. Volume is too low
1. Volume too high
Distortion
of sound 2. Speaker may be damaged
1. Microphone plug is not fully
inserted.
Karaoke
2. Microphone switch is not on
does not
3. Microphone volume knob is
work at the lowest position
4. Wireless microphone has low
battery
1. The song format in the U disc
MP3
is incorrect
does not
2. Improper operation has caused
a process disorder
play
3. USB disc is disconnected
Main Technical Speci cation
Peak Power .............................................................................................. 300W
Input Sensitivity ................................................................................ 2OOmV
Frequency Response ................................................................ 55-160KHz
Power Supply .......................................... AC100V- AC24OV, 60Hz/50Hz
*Above specifications are the specifications of the sampling
machine and are for reference purpose only.
* Due to continuous product development, specifications may
be subject to change without prior notification.
PACKAGE CONTAINS
1x Remote Control
•
1x Power Adapter
•
1x Warranty Card
•
1x Carrying Belt
•
1x User Manual
•
1x Wired Microphone
•
1x Audio Cable
•
Solution
1. Use a better music signal
2. Adjust volume
1. Turn down the volume
2. Repair or replace it
1. Plug microphone properly into
the socket
2. Turn on microphone switch
3. Adjust microphone volume
properly
4. Replace battery
1. Transform song format into
Mp3 format
2. Reboot the machine
3. Insert USB disc properly