Ryobi RY52004 Operator's Manual page 12

OPERATION
POSITION FOR STARTING
See Figure 9.
Lay the pruner on the ground and ensure that no objects or
STARTER
obstructions are in the immediate vicinity. Make sure nothing
GRIP
can come in contact with the bar and chain.
ENGINE
SWITCH
Fig. 9
PRIMER BULB
STARTING AND STOPPING
TRIGGER
See Figures 10 - 12.
LOCK
TO START A COLD ENGINE:
DO NOT squeeze the throttle trigger until the engine starts
THROTTLE TRIGGER
and runs.
Fig. 11
n Lay the trimmer on a flat, bare surface.
n PRIME - Press the primer bulb 7 times.
START LEVER
n SET the start lever to the START position.
START
n PULL the rope until the engine starts.
POSITION
n Allow the engine to run for 15 seconds.
n Squeeze trigger lock and throttle trigger.
NOTE: Squeezing the throttle trigger releases the start lever
to the RUN position.
TO START A WARM ENGINE:
PULL the rope until the engine starts.
TO STOP THE ENGINE:
Press and hold the switch in the stop " " position until the
engine stops.
ENGINE
SWITCH
START LEVER
RUN
TRIGGER
POSITION
LOCK
THROTTLE
TRIGGER
Fig. 10
Fig. 12
12