Samsung SmartThings STH-ETH-200 User Manual

One App + One Hub + All Your Things
Creating a safer, smarter home has never been easier. Start with the
SmartThings
SmartThings app and Hub, add your favorite products, and control them from
Hub
another room or another country.
A safer,
smarter home
starts with
me!
App Hub
The free SmartThings The Hub sends
app lets you get commands from
important notifications the free app
Quick-Start Guide
about what's to your connected
happening, control things, and sends
things in every room, important alerts from
and run your home your things to your
from your phone. smartphone.
Meet Your SmartThings Hub
SmartThings lets you easily control, monitor, and secure your home from anywhere
in the world. At the center of it all is the SmartThings Hub.
Things
Add devices from
SmartThings'
family of sensors or
hundreds of other
connected products
to create a smart
home that fits your
lifestyle.
The Brain of Your Smart Home So Easy Anyone Can Do It
Like a live-in translator, the Hub wirelessly connects all of the different sensors As with all SmartThings devices, the Hub requires no wiring or messy installation–
around your home so that they can send important information to your smartphone, just a simple setup that anyone can do.
and to each other.
Simply plug in the included Ethernet cable from your Hub to your Internet router,
The SmartThings Hub connects to your Internet router via the included Ethernet attach the power cord to the wall, and then use the free SmartThings app to start
cable. The Hub has a ZigBee, Z-Wave, and Bluetooth radio, and also supports connecting your devices. Easy peasy.
IP-accessible devices–providing customers with the widest range of supported
devices of any smart home platform. In addition, the Hub contains replaceable
batteries that allow it to continue operating in the event of a power outage.
For a list of products that have been tested and verified as compatible, please visit
http://www.smartthings.com/product/works-with-smartthings/.
Power
TM
Simple Setup
The SmartThings Hub works best if installed in a central location to where your
SmartThings will be connected. The recommended separation distance from the
user for this equipment is 7.6 inches (20 cm).
• Connect your SmartThings Hub to your Internet router using the included
Ethernet cable.
• Plug in the power adapter to an outlet and attach the power connector to
the back of the Hub.
• Continue setting up your Hub by going to www.SmartThings.com/start on
your smartphone and following the on-screen instructions.
Front
Power Adapter
Status Light
Network
Connector
Back
Power Connector
Reset USB Network
(ethernet)
AC Plug