Advertisement
Method TWO
Using WPS (Wi-Fi Protected Setup)
Using WPS is an easier way to extend your host network. You are recommended to use this method if your host
router has the WPS button. The button might look like one of these:
Power On
Plug the extender into an electrical outlet
near your router.
Relocate
1
Plug the extender into an electrical outlet between your router
(Host Network) and the Wi-Fi "dead" zone. The location you
choose must be within the range of your existing host network.
2
Wait until the
LED is lit and solid blue. If not, relocate it closer
to the router to achieve a good (or better) signal quality.
Enjoy!
Both extended networks share the same SSIDs (network names) and passwords as those of your host networks.
Entertainment Adapter
The extender can be used as a wireless adapter to connect any Ethernet-only device
(such as a Blu-ray player, game console, DVR, or smart TV) to your Wi-Fi network.
First, connect the extender to your router referring to Method ONE or Method TWO,
then connect the extender to your Ethernet-only device via an Ethernet cable.
Smart TV
Game Console
Desktop
Frequently Asked Questions (FAQ)
Q1. Why doesn't the login page appear after entering http://tplinkrepeater.net?
·
If your computer is wirelessly connected, please verify that you have connected to the extender's
SSID. If your computer is connected via an Ethernet cable, please verify that the connection is stable.
·
Make sure your computer is set to obtain an IP address automatically.
·
Use the IP address to log in to the page. The default IP is 192.168.0.254. If the extender is connected
to the host router, please go to the router's DHCP client list to obtain the extender's current IP address.
·
Please reset the extender and try again.
If the problem still exists, please refer to the FAQs (NO.931&NO.504) at www.tp-link.com for detailed
instructions.
Q2. How do I restore the extender to its factory default settings?
·
While the extender is powered on, press and hold the Reset button until all the LEDs turn on
momentarily.
Wait until the Power LED
changes to solid blue.
Router
. If not, please refer to Method ONE.
WPS
Connect
1
Press the WPS button on your router, and then press the
WPS
1. Some ISP gateways disable the WPS function by default. If the WPS connection fails, please use Method ONE.
2. For more information about using WPS on your router, please refer to the router manufacturer's user guide.
2
If you are connecting the extender to a dual-band router but only
LED is on, repeat step 1 again to connect the other band.
Host Router
TP-LINK Tether App
TP-LINK Tether app provides a simple, intuitive way to access, manage your extender
using your iOS or Android devices.
Note: The AP mode of the extender is not supported by Tether.
Tether
1. Scan the QR code or search the keywords "TP-LINK Tether" to
How to
2. Ensure your smart device is wirelessly connected to the extender.
begin?
3. Launch the app and start managing your extended network.
Q3. What should I do if the
Method ONE?
·
You may have entered the incorrect Wi-Fi password of your host network during the configuration. Please
log into the extender's web-based interface to check the password and try again.
·
Reset the extender and go through the configuration again.
Q4. I have enabled a wireless MAC filter, wireless access control, or access
control list (ACL) on my host router. What should I do before configuring and
using the extender?
·
If you have enabled those functions of your host router, you may need to disable them first. And
then follow Method ONE or Method TWO to complete the configuration.
For details, please refer to the Troubleshooting of the User Guide on the support page at
www.tp-link.com.
Press
Host Network
Extended Network
Extender
Blue
Red
Ideal location
Too far away
Do initial configuration
of your extender
Turn off LEDs
at a specific time
download the app from the App Store or Play Store.
LED does not change to solid after completing
button on the extender.
The
LED should change
from blinking to a solid state,
indicating a successful WPS
connection.
If not, please use Method ONE.
or
Clients
Change the basic
extended network settings
Block network access
from specific devices
Advertisement
