Caller Id Operation - Venturer 9025 Owner's Manual

CALLER ID OPERATION

VIEW CALL RECORDS
– Press the CID key to go to the received call record.
– Handset will show "CONNECTING TO BASE...", then the received call(s) will be
shows on display.
– Press the scroll key 6/5 to check the next received records (if any).
DIAL FROM CID RECORDS
– Press the "CID" key to go to the received call record.
– Press the scroll key 6/5 to select the CID record that would like to be dialled then
press YES to confirm.
– Press the scroll key 3/4 until "<DIAL>" will be displayed at the bottom line of LCD.
– Finally, press YES to dial the selected record out.
STORE THE CID RECORDS INTO PHONE BOOK
– Press the CID key to go to the received call record.
– Press the scroll key 6/5 to select the CID record that would like to be saved then press
YES to confirm.
– Press the scroll key 3/4 until "<SAVE>" will be displayed at the bottom line of LCD.
Then, press YES to confirm the selected record to be saved.
– Press YES to confirm the the name of selected record. (it would be edited if necessary.)
– Then, press YES to confirm the the number of selected record. (It would be edited if
necessary.)
– Record will be saved into phonebook.
9025_ib_us2.p65
13
14 11/21/02, 12:11 PM