Advertisement
Quick Links
Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE.
MODEL # 1981CT
Patents pending, US Patent# 6,834,915 6,811,216 6,913,313 6,916,066
Shuttle Travel System
Instruction Manual
Convenience through Innovation and thoughtful design
01.06
Advertisement
Related Manuals for Baby Trend 1981CT
Summary of Contents for Baby Trend 1981CT
- Page 1 Read all instructions BEFORE assembly and USE of product. KEEP INSTRUCTIONS FOR FUTURE USE. MODEL # 1981CT Patents pending, US Patent# 6,834,915 6,811,216 6,913,313 6,916,066 Shuttle Travel System Instruction Manual Convenience through Innovation and thoughtful design 01.06...
- Page 2 * Be certain the stroller is fully erect and latched in the open position before allowing the child near the stroller. * Use of the stroller with a child weighing more than 45 pounds will cause excessive wear and stress on the stroller and may cause a hazardous unstable condition to exist.
- Page 3 * To attach the front wheels, unfold stroller as described in the section following. See figure 1. * Lean the stroller backwards so that it rests on the handle and rear frame tubes and the front wheel tubes are pointing upward. Position the front wheel assembly at the front tube such that the hole in the swivel assembly will slide onto the front tube.
- Page 4 * To remove the canopy, pull outward on the fittings on the canopy as shown in figure 15. Push forward on the front frame of the canopy to open. Please see figure 16. Your stroller is now ready to use. Figure 10. Figure 13.
- Page 5 To access the harness pull apart seat pad. Please see figure 17. • Carefully place the child in the stroller seat and bring the safety harness around the child's waist and over the shoulders. Place the crotch strap between the child's legs.
- Page 6 ATTACHMENT OF THE BABY TREND INFANT CAR SEAT * To attach the Baby Trend Infant Car Seat, place seat back in the partially reclined position as described in the seat back positioning section following. Please see figure 25 and 26.
- Page 7 To secure the tray cover, remove the tray from the stroller as shown in the to remove front child tray section. Install the tray cover. Place the tray with the lid side down on a soft flat surface.
- Page 8 To open the canopy, push forward on the front frame of the canopy. To close canopy, pull the front edge toward the rear of the stroller until folded. Always fold the canopy prior to folding the stroller frame. Please see figure 28.
-
Page 9: To Fold Stroller
* Release the folding latch, which is located on the right side. See figure * Lift up on the stroller handle with both hands until the stroller frame is erect and locked in the open position. See figure 36. The stroller has spring-loaded latches on both sides of the frame. - Page 10 figure 38. Pull downward on the front edge of the seat pad to remove from the stroller as shown in figure 39. Please see the care label on the rear of the seat for washing instructions. To re-install the pad, follow these instructions in reverse order.