Fuel Safety - Westinghouse WPX2600 User Manual

FEATURES
1 Spray Gun: Controls the application of water
onto the surface with trigger. Includes trigger
lock.
Gun Lance: Connects to end of spray gun and
2
works with pressure nozzles included.
3
Thermal Relief Valve: When water reaches
125 F warm water will discharge from pump onto
o
ground. Helps to prevent internal pump damage.
4
Recoil Starter: Pull to start engine.
5
Oil Fill/Drain Plug: Access to oil. Includes
dipstick to measure oil levels.
6
Air Filter: Filters dust and debris out of the air
intake to protect the engine.
7
Pump: Generates high pressure.
8
Unloader Valve: Controls pressure output.
9
High Pressure Outlet: Connection for high pressure
hose.
10
Water Inlet: Connection for garden hose.
6
14
13
WPX3100 Shown
8 | Westinghouse Outdoor Power Equipment
15
20
11 Fuel Tank: Fill with regular unleaded fuel. Do not overfill.
12 High Pressure hose: Connect one end to spray
gun and the other end to the water pump on bottom
of pressure washer.
Fuel On/Off Switch: Turns fuel supply to the engine
13
on and off.
Choke: Prepares a cold engine for starting.
14
Nozzles: Varying sizes for various high pressure
15
cleaning applications.
Chemical/Soap Tank: Siphons detergent into the
16
low pressure stream. Automatically turns on when
using black soap nozzle. Only use pressure washer
safe detergents (some units may not have this tank).
17 Oil Drain Plug: Used to drain engine oil.
Engine On/Off Switch: Turn this switch "ON"
18
before using the recoil starter. Turn to "OFF" to stop
the engine.
Chemical/Soap Tube Connections: Connect
19
chemical/soap clear tube to tank and pump.
Nozzle Cleaning Tool: Used to clean nozzles.
20
11
18
4
5
17
16
3
WPX3100 Pump
1
2
19
8
9
8
10
WPX2600/2800 Pump
12
7