Note
Actual charging time depends on the
●
local charging environment.
Power Saving Function
●
Leaving the watch in a dark location for about
one hour between the hours of 10 p.m. and 6
a.m. will cause the display to go blank, and the
watch to enter Level 1 power saving. If the
watch is left in this condition for six or seven
days, the watch will enter Level 2 power
saving.
Power Saving Level 1 :
The second hand stops at 12 o'clock and the
digital display goes blank to save power. The
watch can connect with a phone at this level.
Power Saving Level 2 :
All hands stop and the digital display goes
blank to save power. All functions are
disabled.
Recovering from Power Saving Operation
Use one of the operations below to exit power
saving.
Press any button.
●
Move the watch to a bright location.
●
Trigger auto light by angling the watch
●
towards your face.
Note
The watch will not enter power saving
●
in the cases below.
Alarm Mode
ー
While in the Stopwatch Mode
ー
While in the Timer Mode
ー
You can enable or disable Power
●
Saving.
Configuring Power Saving Function
l
Settings
Note that the watch also may enter
●
power saving if its face is blocked from
light by your sleeve while you are
wearing it.
Operation Guide 5537
Useful Features
Pairing the watch with your phone makes a
number of the watch's features easier to use.
Auto Time Adjustment
Auto Time Adjustment
l
Selection of More Than 300 World Time
Cities
Configuring World Time Settings
l
Stopwatch Data Transfer to the Phone
Viewing Stopwatch Data
l
In addition, a number of other watch settings
can be configured using your phone.
For transfer data to a watch and to
configure settings, you first need to pair
the watch with your phone.
Getting Ready
l
Using Mobile Link with
a Mobile Phone
While there is a Bluetooth connection
between the watch and phone, the watch time
setting is adjusted automatically. You can also
change the watch's other settings.
Note
This function is available only while
●
EDIFICE Connected is running on the
phone.
This section describes watch and
●
phone operations.
X : Watch operation
Y : Phone operation
Getting Ready
A Install the required app on your
phone.
To use the watch with a phone, first tap one of
the links below and install the "EDIFICE
Connected" app on the phone.
iOS (iPhone) Users
●
https://itunes.apple.com/us/app/edifice-
connected/id1327696233?l=ja&ls=1&mt=8
●
Android
(GALAXY, etc.) Users
TM
https://play.google.com/store/apps/details?
id=com.casio.edificeconnected
B Configure Bluetooth settings.
Enable the phone's Bluetooth.
Note
For details about setting procedures,
●
see your phone documentation.
C Pair the watch with a phone.
Before you can use the watch in combination
with a phone, you first need to pair them.
1.
Move the phone to be paired with close to
(within one meter of) the watch.
2.
Y On the Home Screen, tap the "EDIFICE
Connected" icon.
4