Download Print this page

Ryobi 1400677 Operator's Manual

Ryobi technologies inc. battery charger 1400677 operator's manual

Advertisement

Quick Links

THANK YOU FOR BUYING A RYOBI BATTERY CHARGER.
Your new battery charger has been engineered and manufactured to Ryobi's high standard for dependability, ease of
operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
CAUTION: Carefully read through this entire operator's manual before using your new battery charger.
Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your battery charger properly and only
for what it is intended, you will enjoy years of safe, reliable service.
Thank you again for buying Ryobi tools.
SAVE THIS MANUAL FOR FUTURE REFERENCE
OPERATOR'S MANUAL
1400677 Battery Charger

SPECIFICATIONS:

Charger
Input
Charging Voltage
Charging Current
Net Weight
120 Volts, 60 Hz, AC Only – 60 Watts
1400677
9.6 -18 Volt
1.8 Amperes
2.9 Lbs.

Advertisement

loading

Summary of Contents for Ryobi 1400677

  • Page 1: Specifications

    THANK YOU FOR BUYING A RYOBI BATTERY CHARGER. Your new battery charger has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
  • Page 2: Rules For Safe Operation

    Advises you of information or instructions vital to the operation or maintenance of the equipment. WARNING: Do not attempt to operate this battery charger until you have read thoroughly and understand completely all instructions, safety rules, etc. contained in this manual.
  • Page 3 RULES FOR SAFE OPERATION (Continued) DO NOT OPERATE CHARGER WITH A DAMAGED CORD OR PLUG. If damaged, have replaced immediately by a qualified serviceman. Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman.
  • Page 4: Operation

    Yellow light on and red light flashing indicates defective battery pack. Return battery pack to your nearest Ryobi Authorized Service Center for checking or replacing. When your battery pack becomes fully charged, the red light will turn OFF and the green light will turn ON.
  • Page 5: Maintenance

    30 minutes before attempting to recharge. When the battery pack becomes discharged and is hot, this will cause the red light on your battery charger to flash. When battery pack cools down, red light will glow continuously indicating fast charging mode, 1 hour charge time.
  • Page 6: Battery Charger

    • SERVICE Now that you have purchased your charger, should a need ever exist for repair parts or service, simply contact your nearest Ryobi Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. • PART NO.