Royal Sovereign RBC-4500 Owner's Manual page 8

Bill counter with value counting
Table of Contents

Advertisement

PRODUCT OPERATION
-
Counterfeit Detection Methods
All methods are automatically on when the unit is powered up. To manually turn off any or all methods see (CONTROL
PANEL - LOCATED ON PAGE 5.)
-
Menu Settings
Press "MENU" key, you will see: 1. SPEED SET 2. LEVEL SET 3. WARN COUNT 4. DATE&TIME 5. BEEP 6.PRINTER
INTERFACE, press "
1. SPEED SET
Press the RESET-ENTER key, there are three speeds: SPEED 1,900pcs/min, SPEED2, 1,200pcs/min, SPEED3,
1,400pcs/min. Press the number keys: 1,2,3 or press "
2. LEVEL SET
Press the RESET-ENTER key and enter the setting, it will show 1. UV LEVEL 2. MG LEVEL 3. DD LEVEL 4. DOUBLE
LEVEL. Press "
(1.low, 3.middle, and 5.high), press number key 1-5 and select the sensitivity level, then press RESET-ENTER key.
3. WARN COUNT SET
Press the RESET-ENTER key and enter the setting, Press "
fake note is included in the amount; NO means the total amount doesn't include the fake notes), press RESET-ENTER.
4. DATE & TIME
Press the RESET-ENTER key and enter the setting, it displays "YYYY-MM-DD HH:MM:SS", press the number keys
to set the date and time, press the "
5. BEEP
Press the RESET- ENTER key and enter the setting, it will display 1. KEY BEEP OFF 2. KEY BEEP ON 3. WARNING
BEEP OFF 4. WARNING BEEP ON. Press "
quit.
6. PRINTER INTERFACE
Press the RESET-ENTER key and enter the setting, 1. 4800bps 2. 9600bps 3. 14400bps 4. 19200bps 5. 28800bps 6.
57600bps, press "
3.
Place bills into the hopper to begin counting; press "ENTER/RESET" if in manual mode
7
(CONTINUED)
" keys and select the item you need, then press RESET- ENTER.
" key and select the item you need, the press RESET-ENTER. Each sensitivity has 5 levels:
" key and select the set item, the press the RESET-ENTER key.
" key and select the item, then press the RESET-ENTER key and quit.
" key and select the speed, then press RESET-ENTER.
" key and select the item you need (YES means the
" key and select the set item, then press the RESET-ENTER key and

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents