Firmware Update - Russound UNO-TS2 Instruction Manual

Firmware Update

There may be future updates to the UNO-TS2
firmware. Updates will be available online through
the Document Center at www.russound.com ,
under Multi-zone.
The Firmware Update page is reached from the
Installers Setup screen. This screen is the first
step in the firmware update process. The
Russound Programming Cable (P/N 2500-
121036) must be connected to the OS update
port on the front of the UNO-TS2. When ready,
press the "Update my software" button to start the
update process.
The controller must be power cycled after the
firmware or screens have been updated. If multiple
screens are being updated, power cycle after all
have been updated.
Russound Information
The Russound Information page is accessed by
pressing on the Russound logo on the Installers
Setup screen. You can also press the "UNO" logo
on the touchscreen Home screen.
The screen shows the Russound phone number
and web address.
This screen can also be used as a "cleaning"
screen, as nearly all its inactive surface can be
firmly wiped without initiating any control actions.
INSTALLER GUIDE
Other Installer Setup Functions
Firmware Update
This screen is shown when
"Firmware Update" is selected
Russound Information
This screen is shown when "Russound"
is pressed on the Installers Setup
screen
25