Siemens RUGGEDCOM RX1501 Installation Manual page 37

RUGGEDCOM RX1501
Installation Guide
3
Figure 19: Installing a Power Module
1. Chassis 2. Power Module 3. Screws
5. Hand-tighten the screws to secure the power module to the chassis.
6. Turn on power to the module and confirm the module is receiving and supplying power. This is indicated by
the LEDs on the module.
LED
O
I
Installing/Removing Power Modules
1
2
State
Green
Green
The module is supplying power
The module is receiving power
Description
Chapter 3
Modules
29