Koolatron PET PAW PP-05 Instruction Manual page 2

CONTENTS
The PET PAW™ consists of the following unit:
Pet Paw
™
• Easy battery replacement
• Operates on one 9V battery (not included)
For use as an additional paw for your
Koolatron Pet Chime Wireless Electronic Pet Doorbell!
INSTALLATION AND OPERATION INSTRUCTIONS
PET PAW™:
1. To remove battery compartment cover, pinch rear clasp to release.
2. Insert one 9-V battery. Reattach compartment cover.
3. If your Pet Paw will not activate your Pet Chime, use a small screw-
driver to fine tune the sensitivity by turning within 1mm clockwise or
counter-clockwise while pressing the Paw repeatedly until you hear
that the Pet Chime is activated. (see diagram below).
insert screwdriver here