Runco Reflection VX-4000ci Owner's Operating Manual page 32

Widescreen digital light processing projector & dhd video controller with vivix technology

Table of Contents

Step 1:

Remove the Front Cover (Item 5) by

loosening #2 Phillips screw below lens.

Step 2:

Locate and unplug the Motor Assembly

Connector (Item 4); remember wire routing

for the new lens.

Step 3:

Locate the six 9/64 Hex Mounting

Screws (Item 3). Positions are as follows:

2 @ 12 o'clock, 2 @ 9 o'clock,

2 @ 6 o'clock.

Step 4:

Remove the 6 Mounting Screws (Item 3)

while supporting the Lens Assembly;

Lens and Motor Assembly are now free.

Figure 1

Figure 2

Figure 3

Table of Contents