How To Check The Installation - Fujitsu FP-1000 Installation Manual

3.2.3

How to check the installation

There is a simple OPOS test program in the "\Data\OPOS\FP-1000\en\Sample" folder.
Use it to check the installation.
Run "FP_OPOS_Tester.exe."
• Test procedure
(1) Select an interface.
(2) Click [Printer Test].
When the test completes correctly, "Test: Success" is displayed.
•
"Test: Fail" is displayed if the test fails. In this case, check the printer power and interface and then
•
reinstall the driver.
Copyright 2011 – FUJITSU ISOTEC LIMITED
FP-1000 Installation Guide-2 1.1.0.0
28 of 57