Summary of Contents for Thunder TDR04018
- Page 1 THANK YOU FOR CHOOSING THE THUNDER PORTABLE SPEAKER Always follow basic safety precautions when using electrical appliances. Read all instructions carefully and please keep this instruction manual for reference.
-
Page 2: Important Safety Warnings
IMPORTANT SAFETY WARNINGS 1. Keep speaker away from all sources of heat. 2. Ensure you charge the battery at least once a month to keep the lithium battery fully charged and avoid damage from excessive consumption. PRODUCT FEATURES Wireless control 4.2 stereo music playing and mobile hands free communication Two aluminium passive radiator speakers (one at each end), will shake with the music, and power amplifier with DSP... -
Page 3: Technical Information
TECHNICAL INFORMATION Wireless Control Version: 4.2 Impedance: 4Ω Output: 4.5W x 2 Battery: Built-in 2200mAh Size: 186mm (H) x 69mm (D) Net weight: 420g Power input: 5VDC @ 1A AUX in: 3.5mm Driver: 45mm driver x 2 + 2 passive radiator speakers (top and bottom) FM frequency: 87.5MHz-108MHz Support profiles: HFP , A2DP , AVRCP... - Page 4 PRODUCT FUNCTIONS...
- Page 5 PRODUCT FUNCTIONS (CONTINUED) INSTRUCTIONS • Hold for 2-3 seconds to turn on or off. 1. POWER • Press once to switch between the different ON/OFF modes: smartphone, SD card and radio. • Press once to connect to wireless control mode or to answer a phone call. 2.
- Page 6 To pair the device to your smartphone or tablet, turn on your wireless connection function and search for the wireless control speaker. The device will show up as TDR04018. Connect with this option and you will then hear ‘Device Paired’ and the power button will change to a solid blue and stop flashing.
- Page 7 Now turn on the wireless connection function on your device such as your smartphone and search for other devices. When TDR04018 appears, choose the TDR04018 option and connect with it. Once this is done, the left hand speaker will prompt ‘Device Paired’ and the power light will change to a solid blue.
- Page 8 PRODUCT FUNCTIONS (CONTINUED) AUX In Mode Use the included AUX In cable to connect the speaker to an audio source (PC, MP3/MP4 or smartphone). Press the button once to enter AUX In mode. The speaker will alert you when this happens. The speaker will then play the selected music and can be muted by pressing the button once, but the audio source will continue to play the music.
- Page 9 PRODUCT FUNCTIONS (CONTINUED) Card Reader Insert the micro SD card into the speaker and connect the speaker to your PC using the included USB cable. Turn the speaker off and it will be in card reader mode. The micro SD card can then read and save files through the computer. PLEASE NOTE: The first time you use this function, the computer will install the driver automatically.
-
Page 10: Troubleshooting
TROUBLESHOOTING 1. What should I do if the speaker cannot pair with my phone/tablet and play music? • Please check the specifications or manual of the device, and check if it supports A2DP stereo audio transmission. If yes, please ensure you turn on the A2DP stereo mode. -
Page 11: Warranty
WARRANTY When you acquire or fit a Thunder product you have the peace of mind in knowing that it is backed by a comprehensive 12 month warranty against defects in materials and workmanship. The Thunder warranty is provided in addition to any rights you may have under the Australian Consumer Law. - Page 12 GPC Asia Pacific Pty Ltd ABN 97 097 993 283 51-57 Qantas Drive Brisbane Airport QLD 4007 AUSTRALIA thunderauto.com.au // thunderauto.co.nz...