AEG LAVATHERM 9DBA866C User Manual page 20

20 www.aeg.com
To improve readability of the
display when a dryer is
stacked over a washing
machine set the 6th level of
the display brightness. When
the dryer is not stacked level
1 to 5 are suggested.
To change the display brightness:
1. Tap on Display Brightness bar.
2. Scroll the bar to the right or left to
set the level of the brightness.
3
3. Tap on Display Brightness bar to
get back to the machine settings list
or tap on <Programmes bar to get
to the summary screen.
12.4
The sound is heard at the:
• cycle end
• start and end of crease guard phase
You can use this option to deactivate the
buzzer or control the duration of the
buzzer . There are 3 levels of sound
duration (Short, Mid and Long).
To deactivate the buzzer or set the new
duration of the sound:
1. Tap on Cycle End Buzzer bar.
2. Scroll the bar to the right or left to
set the desired value.
Short
3. Tap on Cycle End Buzzer bar to get
back to the machine settings list or
4
Cycle End Buzzer
Mid
tap on <Programmes bar to get to
the summary screen.
12.5
The appliance allows you to chose
between 3 levels (Hard, Medium, Soft)
corresponding to different ranges of
water hardness.
Soft
Medium
5
Hard
Depending on the country, the water
hardness is expressed in equivalent
scales: e.g. French degrees (°f), German
degrees (°d), English degrees (°e),
mmol/l and ppm
If necessary, please contact your local
water authority to check the water
hardness in your area.
To change the default water hardness
level:
1. Tap on Water Hardness bar.
2. Scroll the bar to the right or left to
set the desired level.
3. Tap on Water Hardness bar to get
back to the machine settings list or
tap on <Programmes bar to get to
Long
the summary screen.
12.6
This option helps to set the best
condition to dry the laundry. If you know
the initial spin speed when you washed
Water Hardness
the results from
the included
ppm
water hardness
kit.
< 150 C01-C03
150 - 300 C04-C05
> 300 C06-C07
Medium
Washing Spin Speed