Sound And Display; Do Not Disturb - Huawei P20 lite User Manual

Sound and Display

Do Not Disturb

Instructions
Configure Do Not Disturb Mode
Do not disturb mode blocks calls from strangers and only notifies you when you receive calls and
messages from chosen contacts.
Open Settings and go to Sound > Do not disturb. Toggle on the Enable now switch, then
touch Do not disturb mode and select one of the following options:
Allow calls and messages from important contacts: Select Allow only priority interruptions,
l
and then touch Define priority interruptions to configure which contacts can call or message
you.
Allow alarm ringtones: Select Alarms only to only allow alarm ringtones.
l
Disable all interruptions: Select Don't interrupt to disable ringtones and vibrations and prevent
l
the screen from turning on for incoming calls, messages, and alarms.
Alternatively, swipe down from the status bar and touch
l
enable or disable Do not disturb mode.
Some third-party apps may continue to ring when Do not disturb mode is enabled. Configure
l
the in-app settings to mute notifications from these apps.
Time rule: Prevent interruptions at set times, such as weekends or evenings. Touch Time to configure
the time period and repeat interval, then toggle on the Time switch.
Event rule: Prevent interruptions during meetings or events. Touch Event to enable Do not disturb
mode during calendar events.
Tips
Scheduled Do Not Disturb: Get the Rest You Deserve
Tired of having to set your Phone to silent mode and back to sound mode each time you rest?
Scheduled Do not disturb can block incoming call and notification sounds during your set time
periods. After the set time period has ended your device will automatically return to sound mode,
allowing you to seamlessly transition between rest and work.
Go to Settings, then go to Sound > Do not disturb > Time. Set Repeat, Start time and End
time according to your own preferences. Return to the Do not disturb screen and enable Time. You
will not be disturbed by any notification sounds within the set time periods.
on the shortcuts panel to quickly
106