Set Up And Connections - JVC LT-32G2 Instructions Manual

S
et up and connections
Care when setting
Ê Ê
■ Power requirements
• Connect the power cord only to a
110-240V, 50/60Hz AC outlet.
■ When attaching the TV to the
wall, use the optional JVC wall
mounting unit
• Consult a qualified technician.
• JVC assumes no responsibility for
damage due to improper mounting.
• 200 mm x 200 mm mount which
conforms to VESA standards.
■ Installation requirements
• To avoid overheating, ensure the
unit has ample room.
200 mm
150 mm 50 mm 150 mm 50 mm
Connect an aerial and VCR / DVD Player
Ê Ê
VCR (DVD Player)
• If the microphone is installed,
should be lock it's cable follow
picture.
or
1 Microphone 2 Microphones
• To prevent the TV from falling,
thread the belt through the hole
on the back of the stand and
secure it to the TV rack.
Hole for belt
Belt
(not provided)
Screw (not provided)
AERIAL
OR
• After all the connections have
been made, insert the plug into
an AC outlet.
Stand Assembly
Ê Ê
1 2
4 5
Front panel control
Ê Ê
Power lamp
ON : Lit (Blue)
OFF : Unlit
Power lamp lights while
the TV is on.
"Power Lamp" (P. 9)
Remote control sensor
Eco Sensor
• Touch on the function name to operate the function.
• You will see the power lamp light up if you have touched the button
correctly. Except "Power Lamp" set to "Off". (P. 9)
• "Eco Sensor" available for model LT-32G20 only.
3
6
(x2 Black screw)
(x2 Silver screw)
1 2 3 4 5
1 Select the input source (P. 13)
2 Display on-screen menu / Set
3 Change channel / Page / Hyper
scan function (P. 4)
4 Volume / Adjust
5 Turn on / Off (standby) the TV.
3