Table 2 Dxi4701 Node - Diagnostic Indicators - Quantum DXi4701 User Manual

Chapter 2: DXi4701 Basic Operations
DXi4701 Node
Indicator, Button, or
Item Connector
5 VGA connector
6 USB 2.0 connector
7 Information tag
8 System identification
button
Table 2 DXi4701 Node -
Diagnostic Indicators
Indicator
Health
Hard drive
Electrical
26
Icon
Icon Condition
Solid blue - The system is on and
in good health.
Blinking amber - The system is
on and an error exists.
Blinking amber - A hard drive
error has occurred
Blinking amber - An electrical
error has occurred.
Description
Caution: Use of connected peripheral devices,
such as a USB keyboard and mouse or a
VGA display, is not supported and may
cause incorrect system operation.
Caution: Use of connected peripheral devices,
such as a USB keyboard and mouse or a
VGA display, is not supported and may
cause incorrect system operation.
A slide-out label panel which displays the system
serial number.
Press to toggle the system ID on and off.
The identification buttons on the front and rear
panels can be used to locate a particular system
within a rack. When one of these buttons is
pressed, the system status indicator on the rear
flashes until one of the buttons is pressed again.
Recommended Action
See
Actions
See
page 404.
See
page 404.
General Troubleshooting
on page 402.
Hardware Problems on
Hardware Problems on
Quantum DXi4701 User's Guide