Target Depth Id - Raymarine H6 Owner's Manual

81238_1.book Page 78 Thursday, September 16, 2004 2:49 PM
78
• Between 0.5 and 15 kts, scroll speed varies linearly with boat speed.
• Greater than 15 knts, the scroll speed is constant at 100%.
If you choose manual adjustment, the scroll speed is not related to the speed of
the boat over the bottom. You can also pause the display, but the depth indication
will continue to update.
To change the scrolling speed:
1. Select Controls/More/Scroll. The Scroll softkeys are displayed.
Scroll Speed Auto
2. Click
Scroll speed control box is displayed.
3. Use the cursor to drag the scroll speed bar to the required setting (the further
left the bar, the slower the scroll speed).
4. When you have selected the required scroll speed, click
To pause the scrolling speed:
1. Select Controls/More/Scroll. The scroll speed softkeys are displayed.
Scrolling
2. Click

Target depth ID

You can select whether the depth is displayed for fish echoes. With the target
depth ID set to On, the target depth is displayed just above each target echo.
To turn on Target Depth ID:
1. Select Tools/ Layers. The Layers dialog box is displayed.
2. Double-click
Target Depth ID
3. Click
OK
4. Click
. The soft key changes to
D7283_1
. The soft key changes to
Sonar
. The sonar layers options dialog box is displayed.
action box to
. The sonar application is displayed.
Raymarine H6 - Owner's Manual
Scroll Speed Manual
Back.
Scrolling Paused
.
On
.
and the