Reading Out Traffic Reports - Mercedes-Benz COMAND Supplement Manual

Real-time traffic reports
76
To switch to navigation mode: slide 5 the
X
controller.
To select Navi Navi: turn and press the controller.
X
The map displays the current vehicle position
or the navigation menu appears.
If the navigation menu appears, press the
X
controller.
The map shows the vehicle's current position.
To show the menu: slide 6 the controller.
X
To select Traffic Traffic: turn and press the con-
X
troller.
To select Messages On Route Messages On
X
press the controller.
The traffic report window appears. Several
traffic reports may be available for the calcu-
lated route, marked for example by 1/3.
The report shows the following information:
State/province, road and display of the
R
affected direction
Section of the road to which the traffic
R
report applies
Traffic icon and traffic report
R
To display the next/previous traffic
X
report: turn the controller.
To close the display: press the % button.
X
Displaying all traffic reports
To switch to navigation mode: slide 5 the
X
controller.
To select Navi: turn and press the controller. Navi
X
The map displays the current vehicle position
or the navigation menu appears.
If the navigation menu appears, press the
X
controller.
The map shows the vehicle's current position.
To show the menu: slide 6 the controller.
X
To select Traffic: turn and press the con- Traffic
X
troller.
To select
X
controller.
A list is shown containing all roads, areas or
regions affected by traffic reports. Roads,
areas or regions not on the route also appear
in the list.
To select the road, area or region: turn the
X
controller and press to confirm.
The traffic report is displayed (
There may be several traffic reports for the
affected road.
To close the display: press the % button.
X
Route: turn and
Settings for the display on the map
You can switch these displays on/off on the
map:
Incidents
R
Speed & Flow
R
Free Flow
R
To switch to navigation mode: slide 5 the
X
controller.
To select
X
The map displays the current vehicle position
or the navigation menu appears.
If the navigation menu appears, press the
X
controller.
The map shows the vehicle's current position.
To show the menu: slide 6 the controller.
X
To select
X
troller.
To select
X
turn and press the controller.
Select
X
Flow. Flow
The display is on O or off ª.
Reading out traffic reports on the
route
Introduction
The text reader function is only available while
route guidance is active. It reads out traffic
reports affecting the current route.
You can select from the following text reader
properties:
Language (
R
Text reader speed (
R
All All Messages Messages: turn and press the
Y
Navi: turn and press the controller. Navi
Traffic: turn and press the con- Traffic
Traffic Information On Map Traffic Information On
Incidents Incidents, Speed & Flow Speed & Flow
page 38)
Y
page 35)
Y
page 75).
Map:
or Free Free