smartHUB
1
PACKAGE CONTENTS
1. Flip-Up Antenna
2. Power Adapter Port
1
3. Ethernet Port
4. Network Status Light
5. Sensor Status Light
2
6. Ethernet Cable
3
7. Power Adapter
4
3
CONNECT ROUTER
Connect the Ethernet cable
to your network router.*
6
ACTIVATE smartHUB
After the firmware update is complete and the
Network Status Light is solid, press and hold the
ACTIVATE button for 4 seconds to begin
communication with the My AcuRite servers.
The Network Status Light will remain solid,
indicating normal operation.
WHAT YOU NEED
(not included)
7
5
6
4
PLUG IN
Plug In the power adapter.
The smartHUB will take a
minute to start up.
POWER
ON
PRESS AND HOLD
for 4 seconds
• At least one compatible
AcuRite sensor
2
CONNECT smartHUB
Connect the Ethernet cable to the smartHUB
and flip up the antenna.
FLIP UP
smartHUB
5
During startup,
the blue status
lights will illuminate.
7
CREATE YOUR ACCOUNT
Create your account and register your smartHUB at www.MyAcuRite.com or within the AcuRite mobile
app. Note: It may take up to 10 minutes for the smartHUB to communicate with the My AcuRite servers.
OR
www.MyAcuRite.com
• Network router with an
• "Always-on" Internet
available Ethernet port
connection
1A2B3C4D5E6F
WRITE DOWN THE smartHUB Device ID;
printed on the bottom of the device.
You will need this when adding the
smartHUB to your account.
DEVICE ID
WAIT
After powering on your smartHUB, it will connect to the
My AcuRite servers and download available firmware
updates. This may take up to 30 minutes.
!
WAIT
NETWORK
NETWORK
STATUS
STATUS
LIGHT
LIGHT
FLASHING
SOLID
When Network Status Light stops
Automatically
DOWNLOADING
latest software updates.
flashing (is solid), you are
READY
for the next step.
DO NOT UNPLUG CABLES
READY
AcuRite APP