Echelon Lumewave EW-205 Install Manual

Motion Sensor Assembly
Motion Sensor Assembly
1. Pull the 3 motion sensor
wires through the spacer
and mounting bracket.
(Figure 1.)
2. Secure mounting bracket
to spacer and motion sensor
with 2 washers and 2 nuts
as shown.
Mounting to Pole
Mounting to Pole
1. Drill hole into light pole
between 8' and 10' from
ground.
(Figure 2.)
2. Connect light fixture and
motion sensor with CAT 5
cable. See wiring diagram
below.
3. Secure motion sensor to
pole with band clamp.
(Figure 3.)

Wiring Diagram

Light
Fixture
MOTION SENSOR INSTALL MANUAL
MOTION SENSOR INSTALL MANUAL
Mounting
Bracket
Spacer
Motion
Sensor
8'-10'
Figure 2
Blue
Black
Red
MODEL: EW-205-12-LU
MODEL: EW-205
Figure 1.
Figure 3
CAT 5
Cable
Motion
Sensor
Blue
Black
Red
www.echelon.com