Advertisement
STEP 7 : Please click "Finish" to finish the installation.
STEP 8 : Execute the WDL-U700 utility, and then right-click
the tray icon
task bar. Select "Launch Config Utility" to start
setting your wireless network.
3.a Connection Method - 1
PLANET WDL-U700 supports WPS. You can configure the
wireless network by using the WPS Function.
a.1 Click "Profile Settings" icon.
a.1
3.b Connection Method - 2
You can also configure the wireless network by yourself via
PLANET 11n USB Wireless LAN Utility.
b.1 Click "Available Network" icon to search the available
wireless AP.
b.1
b.2 Click twice on the AP and you would be like to connected
or click the "Connect" icon at the lower-right corner of
the window.
b.2
b.3 After confirmed the Authentication and Encryption
method, key in the password of the wireless AP in the
"WPA Preshared Key". Click "Next" button, and you'll
see the connection has been added to the profile,
meaning you are being connected to the wireless
network successfully.
of WDL-U700 from the system
– 5 –
– 7 –
a.2 Click "Add WPS Profile" button.
a.2
a.3 Click "Next" button to go to the next step, and then
press the WPS button equipped on your AP.
a.3
And these two network devices will begin to negotiate with
each other. Then you'll be connected to the wireless network
successfully.
b.3
Further Information:
The
steps
above
introduce
WDL-U700. For further configuration of the Wi-Fi Protected
Setup (WPS), Software AP etc, please refer to the user's manual
in the CD. If you have further questions, please contact the local
dealer or distributor where you purchased this product.
– 6 –
simple
installation
for
2011-E23200-001
– 8 –
the
Advertisement
