Troubleshooting Guide Model No.: WM.COM 1614205 /SMUS1614203 /SM.COM1614204 Product Name: Dome Hockey 2016 This guide provides helpful hints and solutions for troubleshooting of the product above. Table of Contents No sound on Control Box and no numbers displayed on Scorers ---------- page 1,2...
No sound on Control Box and no numbers displayed on Scorers Step 1: Please check the Adaptor Wire to the Control Box if it is installed correctly. Adaptor START START START MINUTES RESET ON/OFF Control Box Step 2: Please check the “Scorer Display Wire - Long & Short” to the Control Box and Scorer Display if it is installed correctly.
Step 3: Please check the “power switch of Control Box” if it is turned on. Turn on the power switch of Control Box. Step 4: If the above 3 steps have failed then.. Replace the Control Box and Scorer Display with a new one. No sound on Control Box Step 1: Check that the "Sound on/off"...
No numbers displayed on Scorer Displays Step 1: Check that both the scoring sensor wires - long and short are plugged into the control box well. Unplug, then re-connect them making sure you have a good connection. Step 2: If no numbers on only one scorer display: Interchange the scorer display wires and plug into the control box and you should have one of the following conditions: a) If numbers are now displayed on one side but not the other replace the scoring sensor...
Step 3: If no numbers displayed on both scorer displays: Replace the scorer display wires and plug into the control box. a) If numbers are now displayed on one side but not the other, replace the scorer display wire with a new one. b) If no numbers are still being displayed replace the scorer display with a new one.
Page 6
Step 2: If it is still now working try the following steps: a. Pull out the scorer display from the top rail. b. Re-check the score plug and the scorer display jack for any signs of glue or other debris on the parts. Clean off any debris and re-connect it as below pictures. Step 3: If incomplete numbers on one scorer display only: Take out both of the scorer displays and interchange to re-install.
Page 7
Step 4: If in complete numbers on both of the Scorer displays. Replace the Scorer Displays, Scorer Display Wire and Control Box with a new one. Step 5: If incomplete numbers on the time only: Replace the scorer display and scorer display wires with a new one. Step 6: If incomplete numbers on all of the Scorer Displays with the same character .
No counting on Scorer Displays Step 1: Check that the "Start" button is turned on at the control box. Re-press the button - “START” on the Control Box. Step 2: Please check the “Puck Catcher Wire with Sensor -1 & 2” if both are connected with the Control Box well.
Unworkable button on the Control Box Apron corner reasembly Step 1: Please check the “Electronic Scorer Operation Guides” on the Assembly Instruction Refer to the Electronic Scorer Operation Guides and re-operate. If still, inoperable, please replace the Control Box with a new one. page 8...
Replacement Parts# SCORER DISPLAY WIRE-SHORT ____________________________#P1 SCORER DISPLAY WIRE-LONG _____________________________#P2 CONTROL BOX _________________________________________ #P3 SCORER DISPLAY________________________________________#P4 PUCK CATCHER with SHORT WIRE _________________________#P12 PUCK CATCHER with LONG WIRE __________________________ #P13 If you use the websie to order parts, please do not call our 800 number as well or CHARGES for duplicate shipments will be accessed.