1
PACKAGE CONTENTS
1. AcuRite Access
2. Ethernet cable
3. AC power adapter
1
3
CONNECT
Connect Ethernet cable to your
network router.*
6
WAIT
After starting the Access, the
device will connect to My AcuRite
and download available firmware
updates. It may take up to 30
minutes. When Network Status
Light stops flashing (is solid), you
are READY for the next step.
®
4
INSTALL BACKUP
BATTERIES
On the bottom of the Access, remove
the battery cover, then
insert three AA
alkaline batteries.
WAIT
STEADY
BLUE LIGHT
WHAT YOU NEED
TM
(not included)
2
CONNECT ACCESS
Connect the Ethernet cable to the Access
2
3
ID# XXXXXXXXX
model# XXXXXX
FCC XXXXXX
AcuRite.com
7
CREATE YOUR ACCOUNT
Create your account and register your Access at www.myacurite.com.
NOTE: It may take up to 10 minutes for the Access to communicate with
the My AcuRite service.
• At least one compatible AcuRite device
• Network router with an available Ethernet port
• "Always-on" internet connection
AcuRite
Access
WRITE DOWN THE Device ID;
printed on the bottom of the device.
You will need this when adding the
Access
5
PLUG IN
Plug in the power adapter. The Access
will take a minute to start up.
POWER
ON
OR
www.MyAcuRite.com
ID# XXXXXXXXX
model# XXXXXX
FCC XXXXXX
AcuRite.com
to myacurite.com.
DEVICE ID
AcuRite
MyAcuRite APP