AUTO PROGRAMME TUNING
(IN ANALOGUE MODE)
All stations which can be received are stored by this
method. It is recommended that you use Auto tuning during
installation of this TV.
1
Press the MENU button and then
select the SETUP menu.
Press the
button and then
2
G
Auto Tuning.
3
Press the
button to select System. Select a TV
G
system with the
F
or
BG : PAL B/G, SECAM B/G (Europe / East Europe /
Asia / New Zealand / M.East / Africa / Australia)
I
: PAL I/II (U.K. / Ireland / Hong Kong / South
Africa)
DK : PAL D/K, SECAM D/K (East Europe / China /
Africa / CIS)
M : NTSC-M (Except for Singapore)
4
Press the
button to select Storage From.
E
Select the initial programme number with the
button or NUMBER buttons on the Storage From
menu.
5
Press the
button to select Start.
E
The station name is stored for stations which
broadcast VPS (Video Programme Service), PDC
(Programme Delivery Control) or TELETEXT data.
If no station name can be assigned to a station, the
channel number is assigned and stored as C (V/UHF
01-69) or S (Cable 01-47), followed by a number.
To stop auto tuning, press the MENU button.
When auto tuning is complete, the Programme
Edit menu appears on the screen.
See the 'Programme Edit' section to edit the
stored programme.
button to
D
E
or
button to select
D
or
E
button;
G
F
Auto Tuning
Manual Tuning
Programme Edit
or
G
BACK
INFO i
MENU
EXIT
GUIDE
OK
FAV
VOL
PR
MUTE
1
2
3
4
5
6
7
8
9
LIST
0
Q. V I E W
SETUP
G
Auto Tuning
PICTURE
Manual Tuning
O
Programme Edit
AUDIO
O
TIME
O
OPTION
O
Prev.
MENU
1
System
BG
G
Storage From
2
Start
2
3
4
5
39